At the bottom of the sink, there are 3 silicon heaters with 1200W power and 0-90°C thermostat control.

 The bottom of the Hot Water pool has a slope towards the hole to prevent water accumulation.

 There is a removable straining sheet in the hot pool.

 A 3/4" ball valve is installed to drain the water.

 The polyester control panel is separate to be mounted on the wall and has a 0-1 on-off switch.

 The legs are made of 40*40*1.2 mm stainless steel stone, closed box profile and there are adjustable ball joint feet at the end.

 The top table is flat and double-turned, with a 60 mm back.

 All of them are made of AISI304 quality 18/8 Cr-Ni stainless steel sheet.